What are the maintenance methods of aluminum profile shell? We all know that the aluminum radiator is the aluminum material with different cross-section shapes obtained by hot melting and extrusion of aluminum bars. The production process of aluminum profile mainly includes three processes: casting, extrusion and coloring. Among them, coloring mainly includes: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer printing and other processes. How much do you know about aluminum shell? What are the maintenance methods of aluminum profile shell? Today I will share with you:

1. Don't touch the measuring surface of the measuring tool with your hand, because the wet dirt such as sweat on your hand will pollute the measuring surface and make it rusty. Do not mix the measuring tool with other tools and metal materials to avoid damaging the measuring tool.

2. After using the measuring tool, wipe the surface stains and aluminum scraps, loosen the fastening device, and when it is not used for a long time (more than 1 month), apply antirust oil on the measuring surface. When the measuring tool is not used, it shall be put into the protection box, used by special personnel, and the annual examination record of the measuring tool tested by the authoritative unit shall be made.

3. The storage place of measuring tools shall be clean and dry, free of vibration and corrosive gas, and far away from places with large temperature change range or magnetic field. The measuring tools stored in the measuring box shall be clean and dry, and other sundries shall not be stored.

4. When there is burr on the workpiece surface, it is necessary to remove the burr and measure again, otherwise the measuring tool will be worn and the accuracy of the measurement result will be affected.

5. Do not use oilstone or emery cloth to rub the surface, measuring surface and marking part of the measuring tool. Non measuring maintenance personnel are not allowed to dismantle, refit or repair the measuring tool without permission.

6. It is not allowed to use the measuring claw tip of the caliper as a scriber, compass or other tool. It is not allowed to manually twist two claws or use the measuring tool as a caliper.

Aluminum alloy has the characteristics of light weight, low cost, uniform stress, and not easy to corrosion. It is important that the heat dissipation of aluminum alloy is better than other materials. When the products are exposed to high temperature for a long time, aluminum alloy should be selected.

The maintenance methods of aluminum profile shell will be shared here. The aluminum profile shell has good performance, high precision, energy saving and environmental protection, and enjoys a good reputation in the domestic and foreign markets. The product quality has been steadily improved, and the product standard level has been in the advanced ranks in the world. Except for the production according to the national standards, the main aluminum producers can directly accept the orders according to the requirements of the world's advanced national standards Goods.